Safety Maker, Inc.  

Houston,  TX 
United States
http://www.safetyboot.com
  • Booth: 101

The Safety Boot® Guardrail System is featured on the OSHA.GOV website as a reliable solution for free standing temporary guardrails and stair rails.

 The Safety Boot® is currently manufacturerd and marketed in several countries across the globe. The Safety Boot® has been tested by third party engineering firms as exceeding United States Federal OSHA guardrail regulations, as well as fall protection and guardrail safety requirements in the Canadian Territories and the countries of Australia and New Zealand. Stress engineering report summary is shipped with every order to ensure that written documentation is readily available on-site in the event of an on-site OSHA or safety inspection. 

Each Safety Boot® Guardrail System unit is labeled with a QR code for easy on-site scanning to download installation instructions in multiple languages and provides reliable and affordable fall protection on all of your jobsites.

Brands: Safety Boot® Guardrail System, SurShield®, VersiShield®, StringerShield®


 Products

  • StringerShield® Stair Rail Clamping System
    The StringerShield® Stair Rail Clamping System allows contractors to quickly erect OSHA compliant stair rail systems on stringer stairs and/or pan stairs, typically found on Commercial and Multi-Family construction projects....

  • StringerShield® Stair Rail Clamping System: We have had a tremendous response to this unique safety product, with many contractors utilizing this system in parking garage stairways, airport control towers, multi-family stairways, commercial structure stairways and more.

    Each unit clamps directly onto the edge of the stringer or pan stair edge for safe, quick protection without drilling into the structure and easily adjusts to accommodate 8 inch to 12 inch stringer depth and 1.5 inch to 2.5 inch width.

    The StringerShield ships with comprehensive installation instructions and an independent, third-party engineering test summary showing OSHA guardrail strength compliance is available upon request.

    The StringerShield Stair Rail Clamping System is durable, fully reusable and exceeds United States Federal OSHA temporary stair rail strength regulations.

    • This System Is Designed & Tested For Use As A Temporary Stair Rail System
    • It Is Not Designed For Use As A Guardrail System On Horizontal Surfaces

  • Safety Boot® Guardrail System
    Safety Boot® Guardrail System is featured on US federal government OSHA.gov website! The Safety Boot® provides contractors with a proven method for constructing versatile, freestanding guardrail & stair rail systems that exceed OSHA guardrail regulations....

  • The Safety Boot® Guardrail System provides contractors with a proven method for constructing versatile, freestanding temporary guardrail and stair rail systems that exceed OSHA guardrail regulations. The fully reusable Safety Boot features a unique design that allows toeboards to be inserted quickly and easily for complete OSHA required toeboard protection. The Safety Boot Guardrail System can help solve many guardrail issues that face construction contractors and their subcontractors on a daily basis. The simple Safety Boot design creates rigid anchorage points for freestanding posts complete with slots for toeboards to be inserted quickly. The fully reusable Safety Boot can be used for edge protection on most structures by building out an OSHA compliant guardrail system using job site tools and construction grade 2 in. x 4 in. lumber material. The Safety Boot Guardrail System has been tested and proven to meet OSHA's Fall Protection Regulation (Standard - 29 CFR) 1926.502. Extensive testing was conducted by an independent national engineering test firm and documentation is furnished with every Safety Boot order, in the event of an OSHA inspection.

        • Exceeds United States federal OSHA guardrail strength regulations
        • Always carefully inspect each Safety Boot before every new installation, replace immediately if you notice any signs of excessive wear, damage, abuse or plastic degradation
        • No bracing is required free-standing and will remain in place throughout construction including drywall installation and inside finishing operations
        • Stress engineering documentation is provided with all orders, signed by a professional engineer
        • Fully reusable - leaves the double 2 in. x 4 in. post in the Safety Boot and reuse at the next project
        • Featured on the United States federal government's OSHA.gov website as a viable solution for secure, dependable guardrail systems
        • Featured in the National Association of Home Builders, NAHB - OSHA fall protection training video and handbook used by thousands of builders across the country to train their employees
        • For complete OSHA required toeboard protection on 90° corners, only one single Safety Boot is needed
        • Simple modular design allows for easy placement and movement of mobile repetitive use guardrail systems and enables contractors to build safe dependable guardrails that are fully reusable at the next project site
        • Anchors into most common subfloor materials, including concrete
        • System is designed and tested for flat surface applications only, always follow the specific safety regulations for your state or region
        • Make sure each person reads and understands the installation instructions prior to use, failure to observe this warning could result in serious injury or death
        • Always carefully inspect each Safety Boot unit before every new installation
        • Replace immediately if you notice any signs of excessive wear, damage, abuse or plastic degradation
        • Manufacturer assumes no liability in the event of improper installation, product misuse, or failure of wood construction substrate
        • Never alter or modify the Safety Boot unit, doing so will void warranty

  • VersiShield® Guardrail/Stair Rail Clamping System
    The VersiShield® Guardrail Clamping System allows contractors to quickly erect OSHA compliant guardrail and stair rail systems on open edge structures in many commercial and residential construction situations....

  • The VersiShield Guardrail Clamping System is true to its name by being versatile. The system can be utilized on both horizontal structures such as horizontal balcony and bridge decks as well as odd angled structures such as concrete formed stairs.

    Drilling into the concrete or wood stair tread is not necessary because the clamping device swivels into place on odd angles and locks securely onto the edge of the structure.

    The system can be utilized on concrete structures in multi-story commercial and multifamily projects as well as some residential pre-manufactured wooden stairway systems.

    The VersiShield ships with comprehensive installation instructions and an independent, third-party engineering test summary showing OSHA guardrail strength compliance is available upon request.

    The VersiShield Guardrail Clamping System adjusts for deck and stair thicknesses up to 15 inches and easily adjusts with a simple lift of the ring and tightens securely with one single tension bolt.

  • SurShield® Guardrail Clamping System
    The SurShield® Guardrail Clamping System allows contractors to quickly erect OSHA compliant guardrail systems on open edge concrete structures such as multifamily balconies and bridge decks without drilling....

  • The SurShield® Clamping System utilizes the versatile and efficient design of the Safety Boot® Guardrail System for durable, fully reusable guardrail systems that exceed all United States Federal OSHA temporary guardrail regulations.

    The SurShield® clamps directly onto the edge of the structure for safe, quick protection without drilling into the structure and easily adjusts with a simple lift of the ring and tightens securely with one single tension bolt. The SurShield® Guardrail Clamping System adjusts for deck thicknesses up to 11 inches.

    The SurShield® ships with comprehensive installation instructions and an independent, third-party engineering test summary showing OSHA guardrail strength compliance is available upon request.

    The Safety Boot Guardrail System has been featured on several prestigious video projects and fall protection training resource kits produced by national and local news and building organizations.

  • Safety Boot® Tall Guardrail Brace
    The Safety Boot® Tall Guardrail Brace is designed and tested as a companion product for use exclusively with the Safety Boot® Guardrail System on guardrail systems that exceed 45 inches in height up to a maximum height of 65 inches....

  • The Safety Boot® Tall Guardrail Brace is designed and tested to allow contractors to stay in compliance with the NOTE in United States Federal OSHA Standard 1926.502(b)(1) which states:

    Top edge height of top rails, or equivalent guardrail system members, shall be 42 inches (1.1 m) plus or minus 3 inches (8 cm) above the walking/working level. When conditions warrant, the height of the top edge may exceed the 45-inch height, provided the guardrail system meets all other criteria of this paragraph.

    NOTE: When employees are using stilts, the top edge height of the top rail, or equivalent member, shall be increased an amount equal to the height of the stilts.

    The Tall Guardrail Brace provides guardrail protection up to 65 inches for workers on stilts or ladders working near the guardrail system and has been certified by a national third party engineering firm as exceeding all Federal OSHA guardrail standards and regulations.


    Tall Guardrail Brace Allows Contractors to Build 65 Inch Tall Guardrail Systems to Protect Workers on Stilts.