Ergodyne

St. Paul,  MN 
United States
http://www.ergodyne.com
  • Booth: 2901

Since 1983, Ergodyne has pioneered the development of products that Make The Workplace A Betterplace™.

What started with just one product has grown into a line of top flight, battle-tested, Tenacious Work Gear®; all precision crafted to provide protection, promote prevention and manage the elements for workers on jobsites the world over.  An obsessive attention to design, quality, detail, and innovation allows us to consistently deliver safety solutions required by worksites & desired by workers.

The current lineup is extensive and constantly growing: ProFlex®Hand Protection, ProFlex®Knee Pads, ProFlex® Supports, Skullerz® Head Protection, Skullerz® Eye Protection, Trex™ Footwear Accessories, Chill-Its® Cooling Products, N-Ferno® Warming Products, GloWear® Hi-Vis Apparel, Squids® Lanyards, Arsenal® Gear and Tool Storage and SHAX®Portable Work Shelters.

Brands: ProFlex® Skullerz® Trex™ Chill-Its® N-Ferno® GloWear® Squids® Arsenal® SHAX®.


 Press Releases

  • St. Paul, Minn. (May 31, 2018) – Though still a relatively new concept in the world of industrial safety, more and more safety professionals are taking notice of the rising cost of falling objects, the cause of 255 fatalities in the American workforce in 2016 according to the Bureau of Labor Statistics. As the category of dropped objects prevention evolves, so too do the solutions being offered by pioneers like Ergodyne.

    Their newest innovation in Objects at Heights safety – the Squids® Power Tool Traps – solves for one of the most notorious tool tethering challenges.

    “Power tools are difficult to tether because of the lack of connection points on them to attach a lanyard,” explained Nate Bohmbach, product director, Ergodyne. “Retrofitting attachment points proves a challenge without affecting ergonomics in grip or covering up important information like serial numbers and warnings, or even key features like ventilation or paddle switches.”

    Squids® Power Tool Traps eliminate the need for tape, shrinks and tails, which can be clumsy to apply, turning what can be a confusing process for some into one simple step.

    These patent-pending solutions fasten to drills, impact drivers, grinders and pneumatic tools using the available screw ports already built into the tools. Each set comes complete with a variety of fastener and locking washer sizes based on the tool, product labels, the stainless-steel bracket itself and product instructions.

    “We researched popular tool brands and models to select hardware that will fit the majority of power tools on the job today,” said Bohmbach.

    The Squids® Power Tool Traps are just one example of a broader initiative by Ergodyne to simplify the tethering process for workers.

    “We’re hopeful that by reducing the effort it takes to tether tools, we’ll increase the number of workers taking the proper precautions that will ultimately result in a better, safer workplace with zero drops,” said Tom Votel, president & CEO, Ergodyne.

    For more information or to purchase any of our Tenacious Work Gear®, emailorders@ergodyne.com or call 800-225-8238 // (651) 642-9889

    About Ergodyne

    Since 1983, Ergodyne has pioneered the development of products that Make The Workplace A Betterplace. What started with just one product has grown into a line of top flight, battle-tested, Tenacious Work Gear®; all precision crafted to provide protection, promote prevention and manage the elements for workers on jobsites the world over. The current lineup is extensive and constantly growing: ProFlex® Hand Protection, ProFlex® Knee Pads, ProFlex® Supports, Skullerz®Head Protection, Skullerz® Eye Protection, Trex™ Footwear Accessories, Chill-Its® Cooling Products, N-Ferno® Warming Products, GloWear® Hi-Vis Apparel, Squids® Lanyards, Arsenal® Gear and Tool Storage and SHAX® Portable Work Shelters.

  • St. Paul, Minn. (August 21, 2018) – To prepare workers for increasingly unpredictable winter weather, Ergodyne has announced an expansion of its N-Ferno® line of Tenacious Work Gear®, part of a larger campaign focused on educating safety managers and work crews on the keys to preventing, identifying and treating cold-related illnesses.

    The new N-Ferno® additions include:

    6812 Ribbed Knit Beanie

    • Comfortable, stretchable ribbed knit hat
    • Popular style for workday and weekend
    • Three color options: black, HV lime, HV orange

    6838 Solar-Activated Balaclava

    • Solar-activated tech uses the sun’s rays to amplify warming
    • Lightweight design with dual-layer facemask for multiple climates

    6819BT Be Tenacious Beanie

    • Snug fit
    • Soft, moisture-wicking CoolMax liner
    • Comes in two colors, gray and charcoal gray

    6802Z Zippered Trapper

    • Patent-pending design zips open to fit 8945 Universal Bump Cap Insert
    • Classic trapper warmth and weather resistance

    6802 Trapper, Extended Sizes

    • Now available in XS size

    “The extremes of last winter really pushed work crews, and their gear, to the limit,” said Alsie Nelson, senior product manager, Ergodyne. “These new solutions have been largely driven by worker feedback and demand.”

    Versatility becomes paramount in winter work gear as the weather gets less and less predictable, and the new 6838 Solar-Activated Balaclava gives workers a variety of options for wear to adapt to changing forecasts and personal preference. Advanced Heaterex® technology uses solar rays to create an exothermic warming reaction, amplifying the warming effect of the material up to 15°F (10°C). The result: More warmth, less bulk.

    Additionally, the N-Ferno® 6802 Zippered Trapper Hat with Bump Cap Insert gives a cold-weather classic a boost in utility. It can be worn alone or combined with Ergodyne’s popular 8945 Universal Bump Cap Insert to protect against bumps, scrapes, bruises and other minor head injuries. The patent-pending design features a zippered compartment on the top that opens to fit the insert.

    “Being productive through the winter months isn’t about toughing it out,” said Tom Votel, president & CEO, Ergodyne. “It’s about planning ahead, taking regular breaks to get warm, and layering up in the right gear. Preparation is key, and our mission is making sure workers have what they need to be ready for whatever this winter has in store.”

    For more information or to purchase any of our Tenacious Work Gear®, emailorders@ergodyne.com or call 800-225-8238 // (651) 642-9889

    About Ergodyne

    Since 1983, Ergodyne has pioneered the development of products that Make The Workplace A Betterplace. What started with just one product has grown into a line of top flight, battle-tested, Tenacious Work Gear®; all precision crafted to provide protection, promote prevention and manage the elements for workers on jobsites the world over. The current lineup is extensive and constantly growing: ProFlex® Hand Protection, ProFlex® Knee Pads, ProFlex® Supports, Skullerz®Head Protection, Skullerz® Eye Protection, Trex™ Footwear Accessories, Chill-Its® Cooling Products, N-Ferno® Warming Products, GloWear® Hi-Vis Apparel, Squids® Lanyards, Arsenal® Gear and Tool Storage and SHAX® Portable Work Shelters.

  • St. Paul, Minn (July 12, 2018) – With peak construction season comes a surge in efforts focused on awareness, education and solutions to keep crews safe. In a move addressing the hazard of dropped objects, Ergodyne has announced the release of the Squids® 3760 Water Resistant Phone Pouch & Trap and the 3765 Water Resistant Tablet Pouch & Trap, designed to carry, secure and easily tether the essential electronic devices nearly every worker carries onto the jobsite.

    The 3760 Cell Phone Pouch comes in two sizes, standard and plus. The standard size fits standard iPhones and standard Samsung Cell Phones. The plus size fits all large format iPhone Plus and Samsung Galaxy Plus cell phones. All are designed to fit phones and tablets with today’s bulky aftermarket cases.

    “Dropped objects, including cell phones and tablets, are a major concern on any jobsite with work being done at heights,” said Brent Velenchenko, product specialist, Ergodyne. “And the new Squids® Cell Phone and Tablet Pouch & Trap ensure workers can tether their valuable electronic devices and have them right at their side – safe, secure and accessible.”

    Devices slide easily into the water-resistant sleeve and are secured with a heavy-duty zipper. A clear touchscreen material on both the front and back of the pouch allows workers easy access and full functionality, whether it be talking, texting or taking photos.

    A steel grommet on the bottom for attaching a Squids® Tool Lanyard completes the tethering system.

    “Even off the clock it comes in handy,” continued Velenchenko. “It can be used to protect your phone while you’re camping, fishing, hunting, and boating.”

    “We’re trying to do our part to help worksites stay ahead of the curve and set a higher standard,” said Tom Votel, president & CEO, Ergodyne. “And with the new dropped objects standard, educating work crews on solutions like these is only going to become more important.”

    For more information or to purchase any of our Tenacious Work Gear®, emailorders@ergodyne.com or call 800-225-8238 // (651) 642-9889

    About Ergodyne

    Since 1983, Ergodyne has pioneered the development of products that Make The Workplace A Betterplace. What started with just one product has grown into a line of top flight, battle-tested, Tenacious Work Gear®; all precision crafted to provide protection, promote prevention and manage the elements for workers on jobsites the world over. The current lineup is extensive and constantly growing: ProFlex® Hand Protection, ProFlex® Knee Pads, ProFlex® Supports, Skullerz®Head Protection, Skullerz® Eye Protection, Trex™ Footwear Accessories, Chill-Its® Cooling Products, N-Ferno® Warming Products, GloWear® Hi-Vis Apparel, Squids® Lanyards, Arsenal® Gear and Tool Storage and SHAX® Portable Work Shelters.

  • St. Paul, Minn (June 21, 2018) – Ergodyne has announced an addition to its line of pioneering one-step attachment points meant to simplify the challenging process of tethering power tools, hand tools and instrumentation.

    Squids® Hand Tool Slips provide a simple solution for smaller hand tools such as screwdrivers and hex (Allen) wrenches. These small tools have always had their own unique set of tool tethering challenges, as have power tools and instrumentation like cell phones.

    “Not only are they built without captive connection points, but the low-profile designs can make it difficult to apply tapes, shrinks and tails to create retrofit attachment points,” explained Nate Bohmbach, product director, Ergodyne.

    The patent-pending design and functionality of Slips include a durable ABS plastic encasing a soft friction-fit star that holds a membrane. The user slides the tool through this membrane to create a secure attachment point for tethering. The single piece design also features an attachment ring (where the worker connects the tool lanyard) that swivels around the tool eliminating tangling from the user rotating tool.

    “Slips do just that… slip right onto the tool to create a simple attachment point for tool lanyards,” said Bohmbach.

    Squids® Hand Tool Slips have been have been stringently tested in numerous conditions and allow workers to tether tools up to one pound based on their diameter. Four sizes of Slips are compatible on tools with diameters ranging from 0.05” (1.3mm) to ½” (12.5mm).

    “We know it’s vitally important to tether tools as part of an overall fall protection plan,” said Tom Votel, president & CEO, Ergodyne, “but the lack of these connection points on smaller hand tools has made that difficult in the past. Well, now we’ve boiled the process down to one simple step, removing the common roadblocks and excuses that so often got in the way of protecting against the damage of dropped objects.”

    The newest solution comes only a few weeks before the launch of Ergodyne’s Tablet and Cell Phone Traps, and on the heels of its Squids® Power Tool Brackets, which make clever use of existing utility screw ports in power tools to create a straight-forward attachment point on traditionally hard-to-tether power tools such as drills, impact drivers and grinders.

    For more information or to purchase any of our Tenacious Work Gear®, emailorders@ergodyne.com or call 800-225-8238 // (651) 642-9889

    About Ergodyne

    Since 1983, Ergodyne has pioneered the development of products that Make The Workplace A Betterplace. What started with just one product has grown into a line of top flight, battle-tested, Tenacious Work Gear®; all precision crafted to provide protection, promote prevention and manage the elements for workers on jobsites the world over. The current lineup is extensive and constantly growing: ProFlex® Hand Protection, ProFlex® Knee Pads, ProFlex® Supports, Skullerz®Head Protection, Skullerz® Eye Protection, Trex™ Footwear Accessories, Chill-Its® Cooling Products, N-Ferno® Warming Products, GloWear® Hi-Vis Apparel, Squids® Lanyards, Arsenal® Gear and Tool Storage and SHAX® Portable Work Shelters.

  • St. Paul, Minn. (September 7, 2018) – Ergodyne announced the launch of three new ARSENAL® Realtree Xtra® Bags today, just in time for fall hunting season.

    Based off popular existing models already in the ARSENAL® line, the new bags are ruggedly built with durable 600D polyester matched with water-resistant backing and convenient storage options for hauling essential gear from workday to weekend and back again.

    The new additions include:

    5020 Realtree® Duffel Bag ( XS, S, M, L sizes)

    • Large main compartment
    • End pocket for smaller gear
    • Adjustable/removable shoulder strap
    • 4 different sizes (XS, S, M, L)

    5116 Realtree® General Duty Gear Bag

    • Large main compartment and 2 large end pockets
    • Extra side pocket for additional storage
    • Heavy duty zippers
    • Storm Drains for ventilation

    5143 Realtree® General Duty Gear Backpack

    • Rucksack design for maximum storage
    • Top flap protects from the elements
    • Padded computer sleeve in main pouch

    “These bags not only transport gear to get the job done on the worksite, but are perfect for weekend adventures too.” said Brent Velenchenko, senior product specialist, Ergodyne.

    Hugely popular among sportsmen and women, the Realtree Xtra® camo pattern blends perfectly year round in a variety of habitats, from the leaf change of fall through winter, then again in early spring before green-out.

    The new storage solutions fill out a growing Realtree® lineup of Tenacious Work Gear®.

    “There’s no reason that work gear has to be strictly relegated to the 9-5 grind,” said Tom Votel, president & CEO, Ergodyne. “These new bags are built to bring a bit of personality to the worksite and professional-grade performance to the field.”

    For more information or to purchase any of our Tenacious Work Gear®, emailorders@ergodyne.com or call 800-225-8238 // (651) 642-9889

    About Ergodyne

    Since 1983, Ergodyne has pioneered the development of products that Make The Workplace A Betterplace. What started with just one product has grown into a line of top flight, battle-tested, Tenacious Work Gear®; all precision crafted to provide protection, promote prevention and manage the elements for workers on jobsites the world over. The current lineup is extensive and constantly growing: ProFlex® Hand Protection, ProFlex® Knee Pads, ProFlex® Supports, Skullerz®Head Protection, Skullerz® Eye Protection, Trex™ Footwear Accessories, Chill-Its® Cooling Products, N-Ferno® Warming Products, GloWear® Hi-Vis Apparel, Squids® Lanyards, Arsenal® Gear and Tool Storage and SHAX® Portable Work Shelters.

  • St. Paul, Minn. (October 12, 2018) – When it comes to big knee problems, it’s the little things that add up. It’s also the little things that can help prevent them, like Ergodyne’s new 4×6” ProFlex® Mini Kneeling Pad, offering workers big knee protection in an easy to carry package.

    The new kneeler is built with all the great features of Ergodyne’s regular size kneeling pads, but sized to clip to belts and store in tool boxes. It’s a cushy, convenient landing spot for workers who maybe aren’t kneeling all day, but still have to take a knee from time to time.

    “We’ve had a lot of requests over the years from people like meter readers and service techs for something like this,” said Aaron Skemp, product specialist, Ergodyne. “Folks who are on the move, but still find themselves on one knee frequently and often settle for makeshift knee protection like kneeling on a glove, if anything at all.”

    “Now they have proven protection, sized to their needs,” continued Skemp.

    The ProFlex® 365 Mini Kneeling Pad features:

    • Compact size for optimal portability & storage
    • Convenient loop allows for hanging storage or to easily carry
    • Available alone or with a Squids® Grabber or Carabiner
    • NBR foam padding (1 in. / 25 mm.) nonconductive and keeps its shape over time
    • Dimensions: 4in. x 6in. x 1in. (10cm. x 15cm. x 2.5cm.)

    The slow progression of cumulative knee injuries can make it easy to ignore proper knee protection at first, especially for workers who are on their knees only periodically throughout the day, as opposed to a carpet layer or tile setter.

    “But just because they’re not on their knees all day doesn’t mean they’re not at risk for knee injuries and lower back stress,” said Tom Votel, president & CEO, Ergodyne. “Not to mention that pain-free kneeling can increase productivity.”

    “So don’t be fooled by the ProFlex® 365 Mini Kneeling Pad’s diminutive size,” Votel continued. “It packs all the protection a worker needs to help take care of valuable and vulnerable knees.”

    For more information or to purchase any of our Tenacious Work Gear®, emailorders@ergodyne.com or call 800-225-8238 // (651) 642-9889

    About Ergodyne

    Since 1983, Ergodyne has pioneered the development of products that Make The Workplace A Betterplace. What started with just one product has grown into a line of top flight, battle-tested, Tenacious Work Gear®; all precision crafted to provide protection, promote prevention and manage the elements for workers on jobsites the world over. The current lineup is extensive and constantly growing: ProFlex® Hand Protection, ProFlex® Knee Pads, ProFlex® Supports, Skullerz®Head Protection, Skullerz® Eye Protection, Trex™ Footwear Accessories, Chill-Its® Cooling Products, N-Ferno® Warming Products, GloWear® Hi-Vis Apparel, Squids® Lanyards, Arsenal® Gear and Tool Storage and SHAX® Portable Work Shelters.

  • St. Paul, Minn. (September 21, 2018) – Properly attaching a lanyard might be the most difficult part of tool tethering. But Ergodyne’s new Squids® Wire Tool Tailslook to make that challenge a thing of the past.

    Squids® Wire Tool Tails are the innovative safety gear manufacturer’s latest in a series of new “one-step” tool attachments, which do away with traditional shrink, tape and tails in creating retrofit attachment points for tool tethering.

    “They’re perfect for creating an attachment point on speed squares, small levels and other small hand tools with a built-in captive eye,” said Brent Velenchenko, product specialist, Ergodyne. “They really turn lanyard connection into a straightforward process when compared to traditional methods. Plus, they won’t interfere with a tool’s grip or functionality as shrink or tape might in this situation.”

    Both versions of the new tool attachment – Squids® 3704 Tool Attachment – Loop Tool Tail and the Squids® 3705 Tool Attachment – Screw Gate Tool Tail– are third-party tested to the new ANSI/ISEA 121-2018 standard and feature:

    • Corrosion-resistant stainless steel cable wire to prevent weathering
    • Orange PU coating for protection and durability
    • Copper termination ends
    • One-step simplicity

    The new tool attachments are available now through all Ergodyne distributors to help safety managers and workers prevent the costly damage of dropped objects.

    “We all know that the easier we can make tool tethering for workers, the more likely they are to do it,” said Tom Votel, president & CEO, Ergodyne. “With innovations like our Wire Tool Tails, we’re continuing our efforts in removing roadblocks that might lead to workers forgoing necessary – and possibly life-saving – safety measures while working at heights.”

    For more information or to purchase any of our Tenacious Work Gear®, emailorders@ergodyne.com or call 800-225-8238 // (651) 642-9889

    About Ergodyne

    Since 1983, Ergodyne has pioneered the development of products that Make The Workplace A Betterplace. What started with just one product has grown into a line of top flight, battle-tested, Tenacious Work Gear®; all precision crafted to provide protection, promote prevention and manage the elements for workers on jobsites the world over. The current lineup is extensive and constantly growing: ProFlex® Hand Protection, ProFlex® Knee Pads, ProFlex® Supports, Skullerz®Head Protection, Skullerz® Eye Protection, Trex™ Footwear Accessories, Chill-Its® Cooling Products, N-Ferno® Warming Products, GloWear® Hi-Vis Apparel, Squids® Lanyards, Arsenal® Gear and Tool Storage and SHAX® Portable Work Shelters.

  • St. Paul, Minn. (Sept. 18, 2018) – Ergodyne has announced the release of its new ProFlex® 230LTR Leather Knee Pads, built for protecting the long-term knee health of workers in trades like welding, construction, flooring, concrete work and more.

    The new addition – a leather-wrapped take on Ergodyne’s popular ProFlex® 230 Knee Pads – provides an option previously unavailable in the safety gear manufacturer’s knee protection offering.

    “The genuine leather provides exceptional protection against sparks, slag and fire along with the abrasion resistance to withstand shift after shift of kneeling on the toughest surfaces,” said Chris Cota, senior product manager, Ergodyne.

    With cushy nitrile rubber foam that keeps its shape over time and wider-than-traditional design for extended coverage, the ProFlex® 230LTR aims to minimize the cumulative damage done to knees, which can carry close to 90 percent of a worker’s body weight while in the kneeling position.

    “Modern surgical techniques have certainly come along way,” said Tom Votel, president and CEO, Ergodyne, “but obviously the less painful and costly route is investing in knee protection to keep workers pain-free and productive for the long haul – and hopefully off the operating table. Our new ProFlex® 230LTR Knee Pads give workers yet another option to meet the specific needs of their job while protecting this vital but vulnerable part of their bodies.”

    For more information or to purchase any of our Tenacious Work Gear®, emailorders@ergodyne.com or call 800-225-8238 // (651) 642-9889

    About Ergodyne

    Since 1983, Ergodyne has pioneered the development of products that Make The Workplace A Betterplace. What started with just one product has grown into a line of top flight, battle-tested, Tenacious Work Gear®; all precision crafted to provide protection, promote prevention and manage the elements for workers on jobsites the world over. The current lineup is extensive and constantly growing: ProFlex® Hand Protection, ProFlex® Knee Pads, ProFlex® Supports, Skullerz®Head Protection, Skullerz® Eye Protection, Trex™ Footwear Accessories, Chill-Its® Cooling Products, N-Ferno® Warming Products, GloWear® Hi-Vis Apparel, Squids® Lanyards, Arsenal® Gear and Tool Storage and SHAX® Portable Work Shelters.


 Products

  • N-Ferno® 6819BT Be Tenacious Beanie
    This Beanie is a cold weather essential featuring an acrylic outer shell, a soft moisture wicking CoolMax™ liner and //BeTenacious// messaging. The perfect thermal cap to wear underneath a helmet or a hood and measures 8.5 inches high by 9.25 inches wide....

  • The N-Ferno® 6819BT Be Tenacious Beanie is a cold weather essential featuring an acrylic outer shell, a soft moisture wicking CoolMax liner and //BeTenacious// messaging.

    The outside of the stretchable winter hat is made of 100% acrylic and the interior is lined with a lightweight superior moisture-wicking polyester for quick-drying comfort in all conditions. The snug fit keeps heat in when the temperature drops and provides a comfortable way to layer. It’s the perfect thermal cap to wear underneath a helmet or a hood. 

    Be ready for any outdoor excursion with this classic knit cap sized to fit most noggins small and large. It measures 8.5 inches high by 9.25 inches wide and is machine washable.

    Whether you're hitting the mountain, shoveling your driveway, going for a winter jog or working in cool-to-cold climates, this stylish beanie is sure to become a fall and winter staple.

    Features

    • Available in Black or Grey
    • 100% acrylic, stretchable knit fabric for a snug fit    
    • Soft, moisture-wicking CoolMax polyester lining provides added comfort
    • A classic beanie to keep your noggin' warm, cozy and stylish
    • One Size Fits Most: Our premium, soft acrylic stretches to fit all heads, even Einstein-sized ones
    • Dimensions: 8.5in. x 9.25in.
    • Machine Washable
    • 100% tenacious look
  • N-Ferno® 6802 Zippered Trapper Hat Bump Cap Insert
    The N-Ferno® 6802 Zippered Trapper Hat with Bump Cap Insert provides both warmth from extreme cold and head protection. Wear alone as a classic aviator hat or combine with the lightweight 8945 Universal Bump Cap to protect your cranium....

  • The N-Ferno® 6802 Zippered Trapper Hat with Bump Cap Insert provides both warmth from extreme cold and head protection. Wear alone as a classic aviator hat or combine with the lightweight 8945 Universal Bump Cap to protect your cranium from bumps, scrapes, bruises and other minor head injuries. A zippered compartment on the top opens to an interior pocket to fit a removable bump cap.

    Made with durable, water-resistant nylon to keep you warm, dry and out of the wind in extreme weather conditions. Wear this good-looking winter hat with the ear flaps up or down to completely cover your ears. Even the worst of blizzards don’t stand a chance.

    For decades, the bomber hat has been the #1 choice for outdoorsmen to wear on brutal late-season outings. Also great for outdoor work including mechanics, airport workers, and others working in cold climates that need a little head protection but do not require a bulky hard hat. It's old-school style meets tenacious warmth.

    Features

    • Durable, windproof and water-resistant nylon outer shell
    • 40 grams of 3M™ Thinsulate™ insulation provides superior warmth
    • Interior quilted satin crown lining with PU backing to keep moisture from absorbing into the lining
    • Adjustable YKK® buckle with strap under the chin for the perfect fit
    • Ear flaps can be buttoned up to expose side holes for better hearing
    • Zippered compartment holds the 8945 universal bump cap insert for head protection
    • Skullerz® 8945 Universal Bump Cap Insert is included
    • Not in need of head protection? Check out the 6802 Classic Trapper Hat
    • S/M: (23 3/8 in. around) & L/LX: (25 3/8 in. around)
    • Machine washable
    • Patent pending
  • N-Ferno® 6838 Solar-Activated Dual-Layer Balaclava
    The N-Ferno® Solar Activated Dual-Layer Balaclava featuring Heaterex® technology provides form-fitting comfort and protection from the extreme weather conditions such as the cold, wind and snow....

  • The N-Ferno® Solar Activated Dual-Layer Balaclava featuring Heaterex® technology provides form-fitting comfort and protection from the extreme weather conditions such as the cold, wind and snow. Advanced Heaterex® technology uses solar rays to create an exothermic warming reaction, amplifying the warming effect of the material up to 15°F (10°C).

    This balaclava works as a ski mask or a staple on the job to keep you warm and dry so you can focus on the task at hand. A double layer of fabric covers the nose and mouth so you can pull the nylon, spandex outer layer down below your chin to reveal the soft, breathable, mesh bottom layer. This is also convenient for preventing your safety glasses or sunglasses from fogging up.

    Cover all but your eyes, since you'll probably need those, or wear as an open face mask or neck gaiter. This multipurpose balaclava can be worn comfortably under your hard hat or ski helmet. Designed with lightweight, quick-drying and high stretch material to offer maximum protection against the elements in harsh conditions. So quit playing with matches and build a bonfire around your brain with the element busting energy of the N-Ferno® Series.

    Features

    • Heaterex® Technology amplifies the warming effect of the material up to 15°F (10°C)
    • Dual-Layer Face Mask: Soft, breathable mesh inner layer and a nylon, spandex outer layer;
    • Multi-Climate: Wear both face layers in cold climates or just the mesh when warmer
    • Multi-Functional: Wear as a ski mask, neck gaiter or a full-face mask
    • Lightweight fabric easily fits under hard hats, ski masks or over the top of safety glasses/sunglasses
    • One Size Fits Most: Stretchable fabric that can fit any size head and provide the ultimate winter protection and comfort
    • 81% Nylon, 19% Spandex
    • Machine Washable
  • N-Ferno® 6812 Ribbed Knit Beanie
    The N-Ferno® 6812 Ribbed Knit Beanie is a cool weather essential featuring stretchable ribbed knit fabric that fits snug to keep heat close when the temperature drops....

  • The N-Ferno® 6812 Ribbed Knit Beanie is a cool weather essential featuring stretchable ribbed knit fabric that fits snug to keep heat close when the temperature drops. It’s the perfect knit hat to comfortably layer underneath a helmet or a hood for cool-to-cold conditions. The lightweight thermal cap comes in our favorite shades of hi-vis lime, hi-vis orange and classic black.

    Be ready for any outdoor excursion with this classic knit cap sized to fit most noggins small and large. It measures 9.25 inches high by 8.5 inches wide and is machine washable.

    Wear this stylish beanie as a year-round accessory with comfort you can count on and a classic look for all seasons. Whether you're hitting the mountain, shoveling your driveway or working in cold climates.

    Features

    • 100% acrylic, stretchable rib-knit fabric for a snug fit
    • A classic beanie to keep your noggin' warm, cozy and stylish
    • Suitable for all seasons: Spring / Summer / Autumn / Winter
    • One Size Fits Most: Our premium, soft acrylic stretches to fit all heads, even Einstein-sized ones
    • Dimensions: 9.25in. x 8.5in.
    • Machine Washable   
    • 100% tenacious look
  • Arsenal® 5143 General Duty Gear Backpack
    The Arsenal® 5143 General Duty Gear Backpack keeps your gear clean, dry and organized. Featuring a large main compartment, organizational pockets to house smaller items and a laptop/tablet sleeve to protect your devices....

  • The Arsenal® 5143 General Duty Gear Backpack to makes your life easier by keeping the gear you need clean, dry and organized. This traveling backpack features a large main compartment with plenty of room for your everyday essentials, organizational pockets to house smaller items and a laptop/tablet sleeve to protect your devices.

    DURABLE MATERIALS
    This heavy-duty backpack is super durable made with 600 denier polyester material to withstand wear and tear for long-lasting performance. The bottom is reinforced with a 1680 denier polyester. The reinforced handle and adjustable padded shoulder straps make transporting this bag around easy.

    ULTIMATE ORGANIZATION
    The rucksack backpack style has a large open main compartment to fit all your gear and stays upright for easy loading and unloading, so no gear gets left behind. Need to pack 24 cans of beer and a pack of bacon? No problem. Or if you must, load it up with your clipboard, files, iPad and pens. Three small accessory pockets can hold cell phones, headphones, pens, keys, and other small parts to keep them easily accessible. The padded laptop sleeve in the main pocket ensures your device stays protected. The interior polyester material of the Realtree Xtra® option is a light tan and gray color making it easy to see your stuff in the bag, so you can grab what you need and go.

    FROM WORKDAY TO WEEKEND
    Great for your next outdoor adventure, vacation or visit to the gym. This lightweight backpack is not only great for your hauling your gear for the job but can also be used as a weekend bag as well. It’s the perfect camo backpack for camping, hunting, fishing, canoeing, or any other outdoor activity keeping your gear concealed in the woods or in the duck blind.

    Features

    • 600D polyester durable material withstands wear and tear
    • 1680D ballistic polyester base reinforces the bottom for ultimate durability
    • Heavy-duty webbing straps on top to carry by hand
    • Padded shoulder straps for increased comfort under heavy loads
    • Rucksack design for maximum storage and easy accessibility
    • Heavy-duty #8 zippers to secure gear inside the backpack
    • Top cover flap for protection from the elements  
    • Internal padded computer sleeve in main pouch protects your devices
    • Small essential exterior pocket stores pens, pencils, cell phone, etc.
    • Available in Solid Black or Realtree Xtra® colors
    • Backpack dimensions: 15in. L x 8in. W x 19in. H (38cm. x 20cm. x 48cm.) // 2,280 ci. (37 I.)
  • Squids® 3796 Power Tool Bracket – Drill & Impact
    The Squids® 3796 Power Tool Bracket for Drill & Impact Drivers creates a unique tool attachment point to tether cordless drills, impact drivers and other power tools with a tool lanyard....

  • The Squids® 3796 Power Tool Bracket for Drill & Impact Drivers creates a unique tool attachment point to tether cordless drills, impact drivers and other power tools with a tool lanyard. Connection points for tool lanyards are not always readily available on power tools, which can create hazardous environments while working at-heights. Tethering your tools should be a part of an overall fall protection plan to reduce the risk of dropped objects and increase workplace safety. The stainless-steel tool bracket comes complete with a set of six metric fasteners (M2.5, M3, M4) to mount to a variety of power tools from brands including Bosch, Milwaukee, Makita, DeWalt and many others.

    STRAIGHTFORWARD INSTALLATION
    The one-time assembly creates a quick and easy one-step attachment to tether a lanyard to your power tools. Simply fasten the included tool bracket and labels onto screw ports intended for accessory belt hooks. Once the appropriate torque is applied to the anchor point, connect a tool lanyard to the bracket tether point to safely and securely tether tools.

    PERFECT FOR TOOLS WITH SCREW PORTS

    The Power Tool Bracket for Drills and Impact Drivers is the perfect solution for smaller 12v. cordless power tools that cannot be wrapped by Squids® 3180 Power Tool Wraps. The patent-pending design will retrofit tools up to 3lbs. (1.36kg.) depending the fastener size used. Though intended for cordless drills and cordless impact drivers, these brackets can also fasten to cameras, laser alignment tools and other tools and devices that have screw ports to fit M2.5, M3 and M4 fasteners.

    Features

    • Approved to the ANSI/ISEA 121-2018 standard
    • Stainless-steel bracket with built-in connection point for tool tethering is corrosion-resistant to withstand weathering
    • Patent-pending tool bracket design discretely fastens to open screw port on cordless drills/drivers so you barely notice it’s there  
    • Set includes 1 bracket connection point, 6 fasteners with locking washers and 2 product labels    
    • Perfect for smaller, cylindrical 12v. drills and impact drivers or other power tools where traditional retrofit attachments are not compatible               
    • Ambidextrous design can be flipped to either side of the tool attaching to open screw ports meant for accessory belt clips         
    • Fasteners include alloy steel M2.5 (8mm length) socket cap head, 2 stainless-steel M3 (8mm and 12mm lengths) Philips pan heads, and 3 stainless steel M4 (8mm, 10mm, 12mm lengths) Philips pan heads
    • Maximum tethering capacity of 2.5lbs. (1.13kg) for the M2.5 fastener and 3lbs. (1.36kg) for M3 and M4 fasteners
  • Squids® 3760 Water Resistant Phone Pouch & Trap
    The Squids® Water Resistant Phone Pouch and Trap makes it easy to carry and use your cell phone on the job while preventing dropped objects when working at-heights....

  • The Squids® Water Resistant Phone Pouch and Trap makes it easy to carry and use your cell phone on the job while preventing dropped objects when working at-heights.

    This cell phone pouch is made of a clear touchscreen material that provides protection while still allowing touchscreen use and access to both the front and rear cameras of smartphones. The heavy-duty, easy-to-use zipper closure system safely secures the device inside the cell phone holder.

    There is a steel grommet/ring on the bottom to attach a tool lanyard for a complete tethering system. The sides of the smartphone pouch are made of heavy-duty, water-resistant reinforced tarpaulin, making it perfect for the harshest work environments.

    The smartphone sleeve is also great for the beach, boating, fishing, water-theme parks, camping, hiking or any other outdoor activity. Protect your phone from rain, snow, dirt, dust and sand.

    Features

    • Approved to the ANSI/ISEA 121-2018 standard
    • Water resistant main material protects cell phone from rain, snow, dirt, dust and sand    
    • Clear touchscreen material allows for full screen and camera functions     
    • Heavy-duty zipper securely holds cell phones inside the pouch       
    • Steel grommet/ring can be used to easily connect a tool lanyard   
    • Tarpaulin reinforced side material for durability      
    • Available in standard and plus sizes (see size chart to find the right fit for your cell phone)
    • Designed to fit your cell phone without having to remove other aftermarket cell phone cases
    • Third party certified to a 1lb. (0.5kg.) maximum capacity    
    • Patent pending
  • Squids® 3139 Tool Lanyard Dual Carabiners - 40lb
    The Squids® 3139 Tool Lanyards are built to withstand defined weight limits, and made easy to use by any worker to avoid accidentally dropping objects that could cause unwanted damage, injuries or possibly death....

  • The Squids® 3139 Tool Lanyard is part of an overall fall protection plan to reduce the risk of falling objects and increase workplace safety. When working at-heights, it’s essential to tether tools. High-capacity lanyards are a piece of safety equipment designed to attach one end securely to a fixed anchor point, and the other to an appropriate attachment point on a tool by proper tethering. These Tool Lanyards are built to withstand defined weight limits, and made easy to use by any worker to avoid accidentally dropping objects that could cause unwanted damage, injuries or possibly death.

    DIFFERENTIATED BY DESIGN
    The advanced technical design of the 3139 Tool Lanyard uses a heavy-duty, single-length, non-shock absorbing webbing. There are two swiveling double-action locking carabiners on both ends with captive eyes for maximum security.

    TESTED TO BE TRUSTED
    All lanyards are rigorously tested and third party certified to a 40lb (18kg) maximum capacity with a 2:1 safety factor to prevent falling objects. When working at heights, choosing the best tool tethering equipment matters because there are no second chances.

    Features

    • Approved to the ANSI/ISEA 121-2018 standard
    • Non-shock absorbing webbing provides better protection for heavier tools and lasts longer
    • Designed to be attached to the structure being worked on instead of the worker
    • Single-length construction eliminates weak points
    • Two double-action locking carabiners with captive eyes provide maximum security
    • Swiveling carabiners prevent entanglement
    • Heavy-gauge nylon stitching for strength and durability in harsh work environments
    • Third party certified to a 40lb (18kg) maximum capacity with a 2:1 safety factor
    • Lanyard dimensions - 76in (193cm) length
  • Squids® 3740 Hand Tool Attachment Trap - Slips™
    Squids® Slips™ are perfect retrofit tool attachments for small hand tools to help reduce the risk of dropped objects and increase workplace safety....

  • Squids® Slips are perfect retrofit tool attachments for small hand tools to help reduce the risk of dropped objects and increase workplace safety. Connection points for tool lanyards can be tricky to find, especially on smaller hand tools like screw drivers and hex keys (Allen wrenches). While working at-heights, it is important to tether tools as part of your overall fall protection plan, but the lack of these connection points can make that difficult.

    STRAIGHTFORWARD INSTALLATION

    No additional install tools or complicated wrapping or shrinking! The patented Slips design requires a simple installation that follows its name. Simply “slip” the tool attachment on to the tool and connect a Squids® Tool Lanyard to complete your tethering system. Unlike competitors that offer a fitted cap that can cover up information (like on the end of a screwdriver, for example) these solutions leave the end open. The single piece design is easier to install compared to competitors that require two to three pieces to be assembled onto the tool.

    Simply puncture the interior membrane of the Tool Slip and slide the attachment to the desired location. The star points of the attachment’s interior will hold its location and the swiveling exterior ring will provide a connection point for tool lanyards.

    PERFECT FOR SMALL HAND TOOLS

    Small hand tools have always been challenging to connect tool lanyards to. Screw drivers, small combination wrenches, punches, hex (Allen) wrenches and the like do not have captive connection points, and the low-profile designs can  make it difficult for tapes, shrinks and tails to be applied. The Squids® Hand Tool Slips allow you to tether tools up to 1lb based on their diameter. Four sizes of Slips are compatible on tools with diameters ranging from 0.05” (1.3mm) to ½” (12.5mm). Check out the size chart for specific ranges per size.

    Features

    • Approved to the ANSI/ISEA 121-2018 standard
    • Patent-pending one-piece design easily slides onto small hand tools without requiring additional tools to install or complicated wrapping or shrinking to apply
    • Swiveling exterior ring spins 360-degrees allowing screwdrivers and other rotating tools to be used without issue
    • ABS outer ring provides strength and durability in all environments, testing in hot, cold and wet conditions
    • Flexible inner core grips tool after application securing it as an attachment pointfor a tool lanyard preventing dropped objects
    • Available in four sizes compatible with tools ranging from 0.05” (1.3mm) to ½” (12.5mm)
    • Maximum tethering capacity up to 1lb (0.45kg) dependent on size (review size chart for capacity information)
    • Intended for singled use, discard after after removal and replace
  • Squids® 3704 Wire Tool Attachement Loop Tool Tail
    The Squids® 3704 Wire Tool Attachment has a loop end to securely connect tool lanyards to tools with small captive holes....

  • The Squids® 3704 Wire Tool Attachment has a loop end to securely connect tool lanyards to tools with small captive holes. Connection points for tool lanyards are not always readily available some tools, which can create hazardous environments while working at-heights. Tethering your tools should be a part of an overall fall protection plan to reduce the risk of dropped objects and increase workplace safety. The Loop Tool Tail™ is the unsung hero of most fall protection systems and is perfect for tethering tools like utility knives, small levels, speed squares, insulated pliers, and other tools with small captive holes.

    STRAIGHTFORWARD INSTALLATION
    The one-time assembly creates a quick and easy one-step attachment to connect a tool lanyard to tools with no attachment points. Simply loop the wire tool tail through a captive hole on the tool and loop it back through itself to create a connection point. No tape or shrink are necessary with this attachment solution.

    BUILT TO LAST
    The loop tool attachment is made of a strong stainless-steel wire that is corrosion resistant to withstand weathering and has an orange PU coating over the wire for extra protection and durability. It is 6 in. (15 cm.) in length and has a maximum tethering capacity of 2lbs. (0.9kg.). No tape or shrink wrap necessary to complete the attachment to a tool lanyard.

    Features

    • Approved to the ANSI/ISEA 121-2018 standard
    • Stainless-steel cable wire is corrosion resistant to withstand weathering
    • Orange PU coating over cable wire for added protection and durability
    • Easily loops to create a one-step attachment point
    • Designed to safety tether small captive holes on tools
    • Maximum tethering capacity of 2lbs. (0.9kg.)
    • Extended length – 6in. (15cm.)